Sensor Plates
- 3D Motion Plate Data GuideGuide to understanding 3D Motion Plate data output in Swing Catalyst
- Balance Plate Warranty and ESAThe Balance Plate consists of an array of highly accurate pressure sensors. Due to the nature of the pressure sensors they need re-calibration after a...
- How to install a Balance Plate 3This support article will describe how to setup a new Balance Plate 3 for use with Swing Catalyst.
- How to install Balance Plate 3SThis support article will describe how to setup a new Balance Plate 3s.
- How to use Dual Force Plates with Swing CatalystSetup, calibration, and troubleshooting guide for the Swing Catalyst Dual Force Plate system, covering installation, taring, and recording data.
- Installing and Setting Up the 3D Motion PlateThe software automatically installs the drivers for the force plate and pressure plate's (except the calibration file). Installing it manually shouldn't be...
- Installing and Setting Up the Dual Motion PlateHow to install and set up the Swing Catalyst Dual Motion Plate: connecting the plates, calibration, component detection, and troubleshooting.
- Dual Force Plate installation guideInstallation guide for the Swing Catalyst Dual Force Plate: handling, placement, spacing, storage, warranty terms, and technical specifications.
- Remove Pressure Sensor Noise (Zero Set Calibration)How to remove noise from your pressure sensor (zero set calibration)
- How to install Dual Pressure PlateUse the QR code on the back of the welcome card you received with the plates or click here to register your plates. After registering, you get an email...
- How to use BodiTrak sensors with Swing CatalystThis support article will describe how to setup and configure BodiTrak 2 Vector sensor plates with Swing Catalyst. Technically this article can be used for...
- Balance Plate Data ManualTo help break the golf swing into parts we define four phases and four key points outlined below. The key points (in bold) are shown in Swing Catalyst as...
Last updated on